ASSEMBLY
1. Assemble Support Post; If using
indoors, slide (C1) into (C) ensuring
the tapered end is pointing down. If
using outdoors, use (C2) and insert
the same way.
2. Insert Support Arm (B) into the
hole on Support Post (C) ensuring
the groove is pointing up. (You can
rotate it where you need it when
assembly is complete)
3. Assemble the Alignment Bar; Slide
A1 into A2. Ensure the Orange Spot
on A1 is facing up and the groove in
A2 is facing down.
4. Attach the groove on the
Alignment Bar (A) with the Support
Arm (B).
5. If using indoors install the batteries
in the laser. Slide the laser (D) into
the Laser Holder (E). Slide the laser
holder on the back of the Alignment
bar so the laser shoots out past the
Orange Spot.
6. Insert the unit into the Base (F).
You will need some type of paper
weight to hold the unit up.
7 If using outdoors, insert the
Support Post into the putting green
and start practicing.
indoors, slide (C1) into (C) ensuring
the tapered end is pointing down. If
using outdoors, use (C2) and insert
the same way.
2. Insert Support Arm (B) into the
hole on Support Post (C) ensuring
the groove is pointing up. (You can
rotate it where you need it when
assembly is complete)
3. Assemble the Alignment Bar; Slide
A1 into A2. Ensure the Orange Spot
on A1 is facing up and the groove in
A2 is facing down.
4. Attach the groove on the
Alignment Bar (A) with the Support
Arm (B).
5. If using indoors install the batteries
in the laser. Slide the laser (D) into
the Laser Holder (E). Slide the laser
holder on the back of the Alignment
bar so the laser shoots out past the
Orange Spot.
6. Insert the unit into the Base (F).
You will need some type of paper
weight to hold the unit up.
7 If using outdoors, insert the
Support Post into the putting green
and start practicing.
Orange Spot
/
/
SPECIAL NOTE ABOUT THE LASER
The laser is used indoors to help you with your alignment.
Set up your Pro-Align and a target to putt at, let's say a cup.
Press the button on the laser and rotate the Pro-Align until
the laser is pointing in the direction of your target. Now you
know that the Pro-Align is set up precisely with your target.
The laser is used indoors to help you with your alignment.
Set up your Pro-Align and a target to putt at, let's say a cup.
Press the button on the laser and rotate the Pro-Align until
the laser is pointing in the direction of your target. Now you
know that the Pro-Align is set up precisely with your target.
Putting Aid
